Paint Thickness Tester PCE-CT 80-FN1D5 in Pakistan

Paint Thickness Tester PCE-CT 80-FN1D5 in Pakistan

  • Rs.0



Paint thickness tester for Fe and NFe / USB interface / Battery operation /Integrated data storage.

Specifications:

Measuring rangeFe: 0 ... 1500 µm 
 NFe: 0 ... 1500 µm
Accuracy±(2 % of reading + 1 µm)
Resolution0.1 µm (<100 µm)
 1 µm (>100 µm)
Measurable materialsFor measurements on iron/steel and non-ferrous metals
Min. radius of curvature convex5 mm / 0.19"
Min. radius of curvature concave 25 mm / 0.98"
Min. measuring surfaceØ17 mm / 0.67"
Min. substrate thickness0.2 mm / 0.008" (on magnetic materials)
 0.05 mm / 0.002" (on non-magnetic materials)
Probe modeAutom. mode with material detection (Fe + NFe)
 Magnetic mode (Fe)
 Eddy current mode (NFe)


CalibrationMultipoint calibration (1 ... 4 points for each group)
 Zero-point calibration
Unitsµm, mm, mils
Data transferUSB 2.0
MemoryA volatile measuring group (DIR mode)
 Four measuring groups with autom. storage and max. 2000 readings (GEN mode)
Statistical functionsNumber of measured values, mean, minimum, maximum, standard deviation
AlarmDisplay when the adjustable upper and lower alarm limits are exceeded
Operating timeAutom. shutdown mode (3 min.)
Power supply3 x 1.5 V AAA batteries
Display128 x 128 px LCD display
IndicatorsBattery status
 Fault detection
Operating conditions0 ... +50 °C / 32 ... 122 °F
 20 ... 90 % RH non-condensing
Storage conditions-10 ... +60 °C / 14 ... 140 °F
 20 ... 90 % RH non-condensing
Dimensions143 x 71 x 37 mm / 5.6 x 2.8 x 1.5" (L x W x H)
WeightWith sensor and batteries: ca. 271 g / 9.5 oz


Delivery Scope:

1 x Paint thickness tester PCE-CT 80-FN1D5
3 x AAA batteries
1 x Instruction manual
1 x Carrying case
1 x Set of standard foils
1 x Calibration plates (Fe and NFe)

Download the User Manual of PCE-CT 80-FN1D5

Download the Data Sheet of PCE-CT 80-FN1D5 

Tags: Paint Thickness Tester, Paint Thickness Tester in Pakistan,