Clamp Meter PCE-HVAC 6 in Pakistan
- Brand: PCE Instruments Germany
- Product Code: PCE-HVAC 6
- Availability: Pre-Order
-
Rs.0
Up to 1000 A AC / DC / Non-contact voltage detection / Voltage measurement up to 600V. Temperature measurement via thermocouple / Robust rubberized housing.
Specification:
| Current measurement DC A | ||
| Measuring range | Resolution | Accuracy (of measured value) |
| 500 μA | 0.01 μA | ± (1% + 6 digits) |
| 5000 μA | 0.1 μA | ± (1% + 6 digits) |
| 50 A | 0.01A | ± (2.5% + 5 digits) |
| 1000 A | 0.1 A | ± (2.5% + 30 digits) |
| Current measurement AC A | ||
| Measuring range | Resolution | Accuracy (of measured value) |
| 500 μA | 0.01 μA | ± (1.5% + 30 digits) |
| 5000 μA | 0.1 μA | ± (1.5% + 30 digits) |
| 50 A | 0.01A | ± (2.5% + 30 digits) |
| 1000 A | 0.1 A | ± (2.8% + 30 digits) |
| Note: For AC A measurements, the specification of accuracy refers to the range of 5% to 100% of the measuring range | ||
| Voltage measurement DC V | ||
| Measuring range | Resolution | Accuracy (of measured value) |
| 500 Ω | 0.01 | ± (1% + 9 digits) |
| 5 kΩ | 0.0001 | ± (1% + 5 digits) |
| 50 kΩ | 0.001 | ± (1% + 5 digits) |
| 500 kΩ | 0.01 | ± (1% + 5 digits) |
| 5 MΩ | 0.0001 | ± (3% + 10 digits) |
| 50 MΩ | 0.001 | ± (3.5% + 10 digits) |
| Capacitance measurement | ||
| Measuring range | Resolution | Accuracy (of measured value) |
| 500 nF | 0.01 | ± (3.5% + 40 digits) |
| 5000 nF | 0.1 | ± (3.5% + 10 digits) |
| 50 μF | 0.001 | ± (3.5% + 10 digits) |
| 500 μF | 0.01 | ± (3.5% + 10 digits) |
| 5mF | 0.0001 | ± (5% + 10 digits) |
| Frequency measurement | ||
| Measuring range | Resolution | Accuracy (of measured value) |
| 50 Hz | 0.001 | ± (0.3% + 2 digits) |
| 500 Hz | 0.01 | ± (0.3% + 2 digits) |
| 5 kHz | 0.0001 | ± (0.3% + 2 digits) |
| 50 khz | 0.001 | ± (0.3% + 2 digits) |
| 500 kHz | 0.01 | ± (0.3% + 2 digits) |
| 5 Mhz | 0.0001 | ± (0.3% + 2 digits) |
| 10 MHz | 0.001 | ± (0.3% + 2 digits) |
| Duty cycle | ||
| Measuring range | Resolution | Accuracy (of measured value) |
| 5% ... 95% | 0.1 | ± (1% + 2 digits) (of the reading) |
| Pulse width: 100 μs ... 100 ms | ||
| Frequency: 10 Hz ... 10 kHz | ||
| Temperature | ||
| Measuring range | Resolution | Accuracy (of measured value) |
| -100 ... 1000°C / -148 ... 1832°F | 0.1 | ± (1% + 2.5°C / 3.5°F) |
| General technical data | ||
| Conductor diameter | Max. 48 mm / 1.9 in | |
| Display | Two lines 50,000 digits | |
| Continuity test | 50 ohms / <50-mA | |
| Diode test | 0.3-mA / 2.8V DC | |
| Battery indicator | Battery icon when battery low | |
| Overrange | OL, if measuring range exceeded | |
| Sample rate | 2 Hz | |
| Peak detection | > 1 ms | |
| Thermocouple | Type K | |
| Fuse | 500-mA ceramic quick-acting | |
| AC bandwidth (AC A / AC V) | 50 Hz ... 400 Hz | |
| AC measurement | True RMS | |
| Operating conditions | 5 ... 40°C / 41 ... 104°F, max. 80% RH at 31°C | |
| Storage conditions | -20 ... 60°C / -4 ... 140°F, max. 80% rh | |
| Power supply | 9V block battery | |
| Automatic shutdown | After about 30 minutes | |
| Dimensions (W x H x D) | 230 x 76 x 40 mm / 9 x 3 x 1.6 in | |
| Weight | 315 g / < 1 lb | |
| Safety | IEC 1010-1 (2001): EN 61010-1 (2001) CAT III 600V CAT II 1000V Degree of pollution 2 | |
Delivery Scope:
1 x Clamp meter PCE-HVAC 6
1 x Transport bag
2 x Test leads
1 x Battery 9V block battery
Download the User Manual of PCE-HVAC 6