Calibrator PCE-RTD 20 in Pakistan
- Brand: PCE Instruments Germany
- Product Code: PCE-RTD 20
- Availability: Pre-Order
-
Rs.0
PCE-RTD 20 RTD Calibrator Simulation and Measurement of Resistance & Pt Sensors, Current and Voltage / Li-Ion Battery / Continuity Checker / Ramp Function.
Specification:
| Measuring range | Resolution | Accuracy (of rdg.) |
| Measuring parameter voltage DC V | ||
| 0 ... 30V | 0.001V | ± 0.02% of rdg. + 2 Dgt |
| Measuring parameter current DC mA | ||
| 0 ... 24-mA | 0.001-mA | ± 0.02%of rdg. + 2 Dgt |
| Measurement parameter resistance | ||
| 0 ... 400 Ω | 0.01 Ω | ± 0.02% of rdg. + 0.01Ω |
| Pt10 ... Pt1000 | ||
| -200 ... 200°C / -328 ... 392°F | Pt10 ... Pt400: 0.01°C / 0.018°F | ± 0.2°C / 0.36°F |
| 200 ... 600°C / 392 ... 1112°F | Pt500 ... Pt100: 0.1°C / 0.18°F | ± 0.3°C / 0.54°F |
| 600 ... 850°C / 1112 ... 1562°F | ± 0,3 °C / 0.18°F | |
| Ni100 | ||
| -60 ... 180°C / -76 ... 356°F | 0.01°C / 0.018°F | ± 0.1°C / 0.18°F |
| Ni120 | ||
| -80 ... 260°C / - 112 ... 500°F | ± 0.1°C / 0.18°F | |
| Cu10 | ||
| -200 ... 260°C / -328 ... 500°F | ± 0.2°C / 0.36°F | |
| *In 4-wire measuring mode, a resolution of up to 0.01 Ω in the range 0 ... 1600 Ω is possible. The specified accuracy applies to the 4-wire measuring mode. With 3-wire measurement, measurement inaccuracy increases by 1°C / 1.8°F (Pt10 / Cu10), 0.6°C / 1.08°F (Pt50 / Cu50) and 0.4°C / 0.72°F (remaining types). | ||
| Simulation area | Resolution | Accuracy* |
| Simulation parameter resistance | ||
| 0 ... 400 Ω | 0.01 Ω | ± 0.02% of rdg. + 0.01Ω |
| 400 ... 4000 Ω | 0.1 Ω | ± 0.02% of rdg. + 0.015Ω |
| Simulation parameters Pt10 ... Pt1000 | ||
| -200 ... 200°C / -328 ... 392°F | Pt10 ... Pt400: 0.01 | ± 0.15°C / 0.27°F |
| 200 ... 600°C / 392 ... 1112°F | Pt500 ... Pt100: 0.1 | ± 0.25°C / 0.45°F |
| 600 ... 850°C / 1112 ... 1562°F | ± 0.15°C / 0.27°F | |
| Simulation parameter Ni100 | ||
| -60 ... 180°C | 0.01°C / 0.018°F | ± 0.15°C / 0.27°F |
| Simulation parameter Ni120 | ||
| -80 ... 260°C | 0.01°C / 0.018°F | ± 0.15°C / 0.27°F |
| Simulation parameter Cu10 | ||
| -200 ... 260°C | 0.01°C / 0.018°F | ± 0.8°C / 1.4°F |
| *Accuracy is valid at a current of> 0.2-mA or> 0.4-mA. | ||
| Compatible RTD sensor | Pt10 (385), Pt50 (385), Pt100 (385), Pt200 (385), Pt400 (385), Pt500 (385), Pt1000 (385), Pt10 (3926) | |
| Ni100 (672), Ni (618), Ni120 (672), Cu10 (427), Cu50 (427), Cu100 (427) | ||
| General Specifications PCE-RTD 20 | ||
| Display modes | Measurement: mA / V / Ω / RTD Simulation: Ω / RTD | |
| Temperature units | ° C / ° F / K | |
| Current of RTD measurement | About 300 μA | |
| Maximum current simulation | 3-mA (0 ... 650 Ω) I < 2V / Rsim (650 ... 4000 Ω) | |
| Maximum input voltage | 30V DC | |
| Temperature coefficient | <30 ppm | |
| Input impedance | Voltage measurement:> 1 MΩ Current measurement: 10 Ω | |
| Response time | <100 ms | |
| Refresh rate display | 10 Hz | |
| Data storage | Internal memory 150000 readings | |
| Interface | USB 2.0 | |
| Display | 2.4" TFT LCD 240 x 320 pixels LED illuminated | |
| Output voltage current loop | 24V DC / 24-mA | |
| HART mA loop resistance | 250 Ω ± 20% | |
| Special features | Step and ramp function Automatic and manual mode √x, x2: For the measuring function | |
| Continuity test | Adjustable threshold up to 100 Ω | |
| Power supply | 3.7V / 2300-mAh Li-ion battery | |
| Charging time | About 5 h | |
| Power adapter | Input: 100 ... 240V AC / 50/60 Hz Output: 5V / 1 A DC | |
| Battery life | Approx. 15 h: Simulation and measurement with low LCD illumination Approx. 8 h: Measurement with low LCD illumination | |
| Dimensions | 162 x 82 x 40 mm / 6.4 x 3.2 x 1.6 in | |
| Weight | About 300 g / < 1 lb | |
| Degree of protection | IP20 | |
| Operating conditions | Battery operation: 0 ... 55°C / 32 ... 131°F, 30 ... 90% RH Mains operation: 0 ... 45°C / 32 ... 113°F, 30 ... 90% RH | |
| Storage conditions | -20 .. 60°C / -4 ... 140°F, 30 ... 90% rh non-condensing | |
| Heating time | About 15 minutes | |
Delivery Scope:
1 x RTD Calibrator PCE-RTD 20
3 x Laboratory cables with 2 mm plug
3 x 2 mm laboratory cables with alligator clips
3 x Adapter 2 mm on 4 mm laboratory cable
1 x Mini USB cable
1 x Power supply 5V / 1 A
1 x Carrying bag
1 x Software
1 x User manual
Download the User Manual of PCE-RTD 20
Download the Data Sheet of PCE-RTD 20